English [EN]

Produit ajouté au panier avec succès

Quantité

Total

Il y a 0 produits dans votre panier. Il y a 1 produit dans votre panier.

Total produits TTC

Frais de port TTC À définir

Taxes 0,00 €

Total TTC

Continuer mes achats Commander

CAD HR BASIC XL

Old ranges

Counter flow - Backward - ECM < 13000 m3/h

View larger

CAD HR BASIC XL

Old ranges

Counter flow - Backward - ECM < 13000 m3/h

	ErP 2018 compliant - UVNR Variable EC motors			Filters Supplied as standard: Blowing fresh air F7 (ePM2.5 70%). Reprise stale air M5 (ePM10 50%).

Air-to-air plate heat exchanger produced by the RECUTECH company which participates in the Eurovent program. Certification for AAHE.

High air flow
Double skin insulation 45 mm
Freewheel reaction fan
Low consumption ECM motor
New Modbus / Bacnet communicating regulation
Thermal efficiency up to 90%

Application

Air intake and extraction with heat recovery in tertiary premises.
Installation on feet or frame, indoors or outdoors with rainproof roof.
Regulation of the blowing temperature by electric coil or water coil depending on the model.

Collective residential buildings

Tertiary buildings

Buildings for catering

Description
Dimensions
Documentation
Public Price
Software
References

2 sizes: 80 (8000 m³/ h), 130 (13,000 m³/ h).
8 models according to the types of integrated batteries:

	Post-heating electric	Post-heating hot water	Electric antifreeze
E
ED			■
EI	■
RDI	■		■
ECH		■
EDCH		■	■
ECB		■
EDCB		■	■

Possibility of cold coil or change over coil (hot / cold) by additional BAER battery module.
Vertical construction.
Connection of rectangular ducts in line.
New integrated EVCO regulation specific to VIM .

Communicating Modbus RTU on RS485 or Modbus TCP / IP port, BACnet IP, ETD EVCO remote touch control.

By-pass 100% modulating.

Modular air handling unit delivered in 3 parts:

1 exhaust fan / fresh air filtration module and defrost coil (option).
1 exchanger and bypass module.
1 blower fan module and post-heating / filtration battery for stale air suction.

Construction

Self-supporting structure in extruded aluminum profile.
Aluminum zinc panel, double skin 45 mm, insulation by injected polyurethane foam (42 kg / m3-0.0246W / mk) fire classification B-S3, d0.
Black painted galvanized steel support feet.
Horizontal construction with rectangular in-line connection.
Access to filters, exchanger, coil, and fan from the main face.
Drain Ø1 / 2 for condensate evacuation.
Classification according to EN 1886: D1 / L3 / F7 / T3 / TB3
Air tightness according to standard EN13141-7:
- External leaks: class A1
- Internal leaks: class A2

Exchanger

Aluminum plate heat exchanger, counter current, high efficiency, low pressure drop.

Modulating motorized bypass

Delivered assembled, installed on the fresh air network.
By-pass 100% with shutter for closing the air passage on the exchanger when the bypass is open, to take full advantage of free cooling.
Single-phase, proportional 230V servo-motor.

Motorization

Freewheel type jet fans associated with an electronically commutated motor, ECM motor.
Motor with integrated electronic thermal protection.
Three-phase motor 400V 50 / 60Hz IP54 Class B.

Filters

M5 (ePM10 50%) during extraction.
F7 (ePM2.5 70%) on the introduction of fresh air.

Electric post-heating coil (DI)

Connected to the regulation, it allows the temperature of the blown air to be regulated.
Equipped with safety thermostat with automatic reset (set point 50 ° C) and manual reset (set point 65 ° C).
Separate power supply, connection to a specific external box fitted with a proximity switch.

Hot water coil for water regime above 60/40 HT - High Temperature

2-row coil, composed of copper tubes with aluminum fins on a galvanized steel frame.
copper manifold, threaded connection tube.

Hot water coil for water regime below 60/40 BT - Low Temperature

2-row (size 80) or 3-row (size 130) coil, composed of copper tubes with aluminum fins on a galvanized steel frame.
Copper manifold, threaded connection tube.

Electric antifreeze coil - DD

Placed on the fresh air before the exchanger, avoids the risk of freezing on the exchanger.
Raised, wired and controlled by the regulation.
Separate power supply, connection to a specific external box fitted with a proximity switch.
Safety thermostat with automatic reset (set point 50 ° C) and manual reset (set point 65 ° C).

Accessories

BAER - Reversible hot / cold battery module.
- Self-supporting structure module in extruded aluminum profile.
- Aluminum zinc panel, double skin 45 mm, insulation by injected polyurethane foam (42 kg / m3-0.0246W / mk) fire classification B-S3, d0.
- Black painted galvanized steel support feet.
- 3-row coil, composed of copper tubes with aluminum fins on a galvanized steel frame.
- Copper manifold, threaded connection tube.
- Condensate collection tray.

CSIL - Acoustic box
- Self-supporting structure in extruded aluminum profile.
- Aluminum zinc panel, double skin 45 mm, insulation by injected polyurethane foam (42 kg / m3-0.0246W / mk)
- fire classification B-S3, d0.
- Black painted galvanized steel support feet.
- Baffle thickness 200 mm including mineral wool 55 kg / m² inside a galvanized steel frame. Distance between Baffle 150 mm.
- Suction or discharge grid.
- Motorizable register.

Air treatment selection