NOVAX CONFORT 90/10 G F400
F400 motorized welded hoods
Capture - Inductive curtain 10% - Diffusion - Motorized 400°C / 1 hour
View larger
NOVAX CONFORT 90/10 G F400
New product
 |
 |
- Approved 400°C / 1 hour for installations in large open kitchens
- Waterproof welded design
- Construction compliant with standard NF EN 16282-2
- Made of AISI 304L stainless steel with brushed 220 grain finish
- Hood with vertical sides 12/10th thick at constant height 600 mm
- Improvement of capture efficiency - CETIAT trials
- Reduced extracted throughput by 30% - CETIAT tests
- Rigid and hygienic design
- Stainless steel impact filters compliant with NF EN 16282-6
- Horizontal or vertical discharge
Application
Capture, extraction and filtration of pollutants and heat.
Low speed air distribution from the front.
Suitable for large open kitchens when the installation of a turret or an extraction box is not feasible.
-
Description
-
Dimensions
-
Documentation
-
Public Price
-
Software
-
References
Single backed.
One-piece modules with lengths of 1000, 1500, 2000, 2500 and 3000 mm.
Depth advances 1500 and 1750 mm.
Height 600mm.
Discharge: horizontal or vertical
Flow: 2500 or 3500 m3/h.
hood
Engine
Packaging
Functioning
Recessed waterproof LED lighting with armored protective glass, compliant with standard NF EN 16282-2 (available only on 1750 mm projection).
Sealed lighting by recessed LED spotlights, in accordance with standard NF EN 16282-2.
One-piece modules with lengths of 1000, 1500, 2000, 2500 and 3000 mm.
Depth advances 1500 and 1750 mm.
Height 600mm.
Discharge: horizontal or vertical
Flow: 2500 or 3500 m3/h.
hood
- Hood entirely made of AISI 304L (1.4307) austenitic stainless steel, 220 grain brushed finish.
- Constant height offering a large retention volume.
- Angles bent, welded and polished on the lower part, ensuring great rigidity and perfect sealing.
- Upper hood fixing system designed with no element passing through the extraction plenum in order to guarantee perfect sealing and cleanability.
- Lower peripheral gutters 50 mm wide, 25 mm high with crushed folds and polished welded corners allowing the recovery of condensates and easy and safe cleaning.
- Lower front of the extraction sensor welded in the corners ensuring a high grease retention capacity, fitted with a 3/4" gas threaded evacuation drain and stainless steel plug. Crimped drain system, without roughness and without gasket guaranteeing a cleanability and constant sealing over time.
- All-stainless steel shock filters, flame arrester, compliant with NF EN 16282-6.
- Extraction shell Ø315 mm fitted as standard.
- Insulated impulse chamber incorporating a balancing damper on each tapping and comprising:
- Internal face equipped with a calibrated lip generating the inductive air curtain: induction flow rate between 60 and 100 m3/h/linear m.
- Perforated front face: compensation flow rate up to 1200 m3/h/linear m - Δ P = 60 Pa.
Engine
- Single inlet action fan.
- Protective grille on the suction inlet, in accordance with standard NF EN 60335.
- Fan motor mounted with a 30/10th mm thick galvanized steel reinforcement plate to guarantee the rigidity of the extraction plenum.
- F400 120 motor, IP55, class H, three-phase 230/400 volts 50 Hz, 1 variable speed by frequency converter.
- Supplied with 3 meters of cable, protected by a high temperature oversheath, connected to the motor.
Packaging
- Crate in heat-shrinkable film.
- Exterior faces in stainless steel, protected by PVC film.
Functioning
- Inductive curtain system and low speed diffusion identical to VORAX® COMFORT 90/10.
Recessed waterproof LED lighting with armored protective glass, compliant with standard NF EN 16282-2 (available only on 1750 mm projection).
- IP 55 - easy dismantling for tube replacement.
- 1 x 10 W lg 690 mm for 1000 mm module.
- 1 x 20 W lg 1300 mm for module from 1500 mm.
- 230 volts, 50 Hz, color 6000 K.
- Supplied with a 1.50 m connection cable.
Sealed lighting by recessed LED spotlights, in accordance with standard NF EN 16282-2.
- Fire resistance 90 minutes.
- IP65.
- 230 volts, 50/60 Hz, dimmable, color adjustable (3000K, 4000K or 6000K).
- Dimensions: diameter 83 mm, height 86 mm. Possibility of unclipping the power supply to obtain a height of 53 mm and not protrude from the hood.
- Spotlights mounted and wired on each module.
- Supplied with a 1.5 m connection cable.
NOVAX CONFORT 90/10 G F400
Optional lighting - Supplied with 315 mm ferrule mounted on extraction
Optional lighting - Supplied with 315 mm ferrule mounted on extraction
| LG | Pulse tapping number | C | D | Advanced 1500 | Advanced 1750 | ||
| E | F | E | F | ||||
| 1000 | 1 | 500 | - | 375 | - | 625 | 655 |
| 1500 | 1 | 750 | - | 375 | - | 625 | 1265 |
| 2000 | 2 | 512 | 976 | 375 | - | 625 | 1265 |
| 2500 | 2 | 643.5 | 1213 | 375 | - | 625 | 1265 |
| 3000 | 2 | 643.5 | 1713 | 375 | - | 625 | 1265 |
| Motorization | ||
| 2500m3/h | 3500m3/h | |
| A | 353 | 343 |
| B | 235 | 235 |
Detailed specifications
Text catalog pages (CT)
Public tariff price
Price catalog pages (CP)
Prescription assistance
Specification text (TP)
OPTAIR Kitchen
Download OPTAIR Cuisine
NEW - Software for calculating flow rates and sizing hoods in professional kitchens
OPTAIR CUISINE must be completely re-installed.
For any operating problems, please send your request by email to optair@vim.fr
OPTAIR CUISINE must be completely re-installed.
For any operating problems, please send your request by email to optair@vim.fr
 |
|
